- Create a new Job and click on Configure.
- Click on Survey.
- In Job Configuration menu, click on Select from Library.
- From Configuration Library, select MAGNET Relay and click Edit.
- You can rename the configuration here if you like.
- Match the configuration settings with the ones shown in the image and click Next.
- Select the manufacturer and click Next.
- Select the base receiver model.
- Make sure the Relay Name is at least 3 characters.
- Click Next.
- In base radio configuration, select the Receiver radio button with type as Internal Cellular.
- Click Next.
- Select the provider for Base Modem Dialup. If your country and service provider is not listed, select Other.
- Input all the information of the service provider and click Next.
- Select the rover receiver model and click Next.
- In rover radio configuration, select the Receiver radio button with type as Internal Cellular and Model set to Auto.
- Click Next.
- Select the provider for Rover Modem Dialup. If your country and service provider is not listed, select Other.
- Input all the information of the service provider and click Next.
- All the remaining settings are related to the job conditions
- Click on the green check mark on top right of the window once finished.