Setup GNSS Equipment
Start Base Station
- Set the base up over a known point using a tripod and set level
- Select Setup|Start Base
Define Base Location
-
Select or enter the point for base location
- Select map icon to pick point from map
- Select page icon to pick point from a list
- Enter the antenna height
- Select Start Base
Switch GNSS Connection to Rover Receiver
- Select Yes to switch GNSS Bluetooth connection to rover recevier
Establish Rover Connection
- Select Connect to initiate Bluetooth search
- Choose the rover receiver’s serial number
- Choose Select to connect to intiate Bluetooth pairing
- Select Connect on next screen when prompted for PIN
Setup Robotic Equipment
Backsight Setup
- Select Home button to return to main menu
- Select the Hybrid Switch icon in the top bar to switch from GNSS to Optical
- Select Setup >> Backsight
Occupation Location
Backsight: Requires two known points (or one known point and a known direction)
-
Input backsight data
- Point number/name
- Instrument height
- Backsight point (or direction)
- Prism height
- Select Next
Set/Check Backsight Orientation
- Aim instrument to center of prism
- Press Set
Backsight Check Results
- Results screen will show errors
- Select home button to return to main menu
