TRU (Topcon Receiver Utility): Setup

Basic connection configurations and options for communication between TRU and GNSS receivers.

登录或注册 myTopcon 以查看此页面：

登录注册

TRU (Topcon Receiver Utility): Setup

Connection Options: Serial

Select Device – Application Mode – Receiver Managing.
Select Device – Connect.
Select Serial Port from the drop down menu.
Using the configuration button, select the correct COM Port the receiver is connected to on the PC and/or data controller
Select Connect to connect to the receiver via serial port connection.

Connection Options: Bluetooth

Select Device – Application Mode – Receiver Managing.
Select Device – Connect.
Select Bluetooth from the drop down menu.
Using the configuration button, select a previously used receiver or add a new receiver to connect to via Bluetooth.
Select Connect to connect to the receiver via Bluetooth.

Connection Options: Network

Select Device – Application Mode – Receiver Managing.
Select Device – Connect.
Select Network from the drop down menu.
Using the configuration button, select a previously used receiver or add a new receiver to connect to via Ethernet.
Select Connect to connect to the receiver via Ethernet.

Connection Options: USB

Select Device – Application Mode – Receiver Managing.
Select Device – Connect.
Select USB from the drop down menu.
Using the configuration button, select a receiver currently connected to the PC via USB.
Select Connect to connect to the receiver via USB.