Android Dynamic IP Setup
- At the Home Screen go to Settings
-
With the scanner turned on you should see the SSID of GLS-2000_(serial number)
-
To see on the Network Settings on the GLS-2000 go to Config>Network Settings>WLAN
-
- Touch and hold on the SSID of GLS-2000_(serial number)
- Select Modify network config
- Type in Password – 00(serial number)
- Select Show advance options
- Make sure the IP setting is DHCP
- SAVE!
- At the Home Screen go to VNC Viewer
- In VNC touch the plus (+) sign in the lower right hand corner
- Type in the IP address.
- Touch Create
- Touch Connect
- Touch OK to make connection
