Access Survey Configurations
- Select Configure >> Survey
Equipment Configuration Library
- Under GPS+ Configuration, choose Select from Library
- Select Add
Create GNSS Configuration
- Give the configuration a name that describes the hardware combination such as HiPer SR LongLINK
- Choose RTK for the Type and select Next
- Select Topcon as the Manufacturer for both base and rover
- Select Next
Configure Base Receiver
- Checkmark Ext. Receiver and choose Bluetooth as the communication method
- Choose the desired receiver model such as HiPer SR
- Enter the serial number of the base receiver (optional)
- Leave the default elevation mask set to 13 degrees
- Choose RTCM 3.x as the RTK Format
- The correct antenna will be automatically selected based on the receiver model
- Enter in the correct base antenna height, if using a fixed height tripod enter 2m
-
Select Next
Configure Base Radio
- Choose LongLink™ for the Model
- Select Next
Configure Rover Receiver
- Checkmark Ext. Receiver and choose Bluetooth as the communication method
- Choose the desired receiver model such as HiPer SR
- Enter the serial number of the base receiver (optional)
- Leave the default elevation mask set to 13 degrees
- Choose RTCM 3.x as the RTK Format
- The correct antenna will be automatically selected based on the receiver model
- Enter in the correct rover antenna height, if using a fixed height tripod enter 2m
- Select Next
Configure Rover Radio
- Select the Receiver radio button for the Connect to method
- Choose LongLink™ for Model
- Select Next
At this point the main configutation settings have been established. Select the green checkmark button in the top-right three times to finish or proceed through the remainder of the configuration screens to establish personal preferences.
