MR-2: Network Configuration

TopNET requires all receivers to be connected through the Internet from the host location to the servers. The configuration of the receiver is relatively simple.  However, there are several prerequisite requirements that must be addressed prior to connecting an MR-2 to the host's internet service.  This Quick Guide will walk you through what it takes.

Log in or sign up for myTopcon to view this page:
Sign In Sign Up

MR-2: Network Configuration

0 0

NETWORK CONFIGURATION OF MR-2

TopNET requires all receivers to be connected through the Internet from the host location to the servers. The configuration of the receiver is relatively simple.  However, there are several prerequisite requirements that must be addressed prior to connecting an MR-2 to the host's Internet service.  The receiver will need the IP, Subnet Mask and Gateway IP address that match the host's local subnet.  Additionally, there are several firewall rules that must be in place to allow the data to pass through the host router to the internet.

The common setup for any receiver is to have a static local IP that resides in the host's subnet. Simple quick guides are available to demonstrate how these are obtained as well as configuring the firewall rules at the local installation site.

The MR-2 is a very user-friendly device to configure, provided the installer has all the necessary parts and pieces. These are as follows:

  • MR-2 receiver
  • Serial A cable
  • USB to Serial Adapter
  • Laptop PC
  • Topcon Receiver Utility (TRU)

STEP 1

  • The first step is to connect the MR2 to the PC/Laptop.  This can be done through the Serial A/B port, with the appropriate cable.
  • Next, launch TRU.

STEP 2

  • Once TRU is launched, verify the app is in Receiver Managing mode.  This is relatively straight forward my selecting the Device menu and hovering the mouse over the Application Mode option. Receiver Managing should be selected.

STEP 3

  • From the Device menu, select Connect

STEP 4

  • The Connection Parameters dialog box offers several choices or options to connect by.. Click inside the pull down menu and choose Serial Port. The correct Serial Port should be displayed in the Port Name box.  If not, click the triple dot box and select the correct serial prt being used.

STEP 5

  • The settings for the Network configuration are located in the Receiver Settings portion of TRU. Single click Receiver Settings to advance to te next screen.

STEP 6

  • There are many options in the Receiver Settings window of TRU.  To configure the MR-2 for a network connection, select the Network icon.

STEP 7

The Network icon opens the dialog box to configure the MR-2 with the appropriate network configuration. It is important to note that hese configuration items must match the local are network the MR-2 will reside.  If not, the receivcer cannot be reached from anywhere in the network. If possible, have an IT pro onsite to assist with assigning an IP address in the LAN subnet. 

There are 3 key peices of information needed.

  • Static IP
    • This will be the unique address to the receiver
  • Subnet Mask
    • Defines the range of IP addresses allowed within the subnet
  • Gateway
    • Routers unique IP address responsible for the routing of all devices in the LAN subnet

STEP 8

  • After setting up the Network Configuration on the MR-2, it is best the verify the TCP settings.  From the same Network window, select the TCP tab.  There are only 2 fields that need to be verified, Timeout and Password.  the Timeout field needs to be set to something greater than zero and the Password can be set to whatever is desired.
  • Once these steps are completed, click OK in the upper right corner.  TRU will prompt for a reset. Accept and allow the MR-2 to reset