Unzip Installation File to a USB Flash Drive
- On a Windows machine, unzip(extract all) the installation ZIP file into the root folder of a USB flash drive.
- Safely eject the USB flash drive from the Windows machine.
- Plug the USB flash drive into the powered-down console.
- Power up the console by pressing and holding the green power button on the back of the console.
Provisioning USB for Upgrade
- Go to the Setup screen (via the wrench button in lower left corner).
- Select System / Utilities / PROVISION USB FOR UPGRADE and select Yes.
- Power down the console by briefly pressing the green power button.
- The system will ask if you want to power down. Select Yes to turn off.
- Leave the USB plugged into the console and restart by pressing and holding the green power button.
- The installation procedure will start automatically and will take a few minutes.
- After the installation is complete, the console will display the message ‘Please remove the USB flash drive’.
- Remove the USB flash drive. The console will restart automatically.
- After the restart, the console will display the touch screen calibration screen. Touch the displayed cross marks in turn and then press Confirm, or select no within 10 seconds to skip this step. This is only done the first time after installation.
- The console will provide the option to restore all user data to the state it was before the upgrade. WARNING: Selecting No will delete all data saved on the console. The console will restart automatically.