- Sensor angle compensation is a factor of how a tow point responds to sensor placement
- It is used during large grade corrections during the paving process
- The compensation value is based on the ratio between sensor movement and cylinder movement
- It is related to the sensor distance from the towpoint
- Cylinder movement devided by sensor movement equals percent value
- To set the value select the <Screed> option from the <Control> menu
- The Screed options menu will open
- select < Sensor Angle Comp.>
- Calculate the copensation value
- Devide the cylinder travel distance by the sensor travel distance
- Enter the percentage into the field as a whole number
- Select <OK> to confirm
- The Value of the setting is not displayed on the main screen
- 25 is the default
- It is best to leave set to default if the correct value is uncertain
