Base Configuration:
- Open TRU and connect to Base in Reciever Managing Mode.
- Connection parameters
- Click on Receiver Settings.
- Click on Ports.
- Click on the Bluetooth tab.
- Click on LongLink Service A.
- Click the Output Mode dropdown list.
- Click on RTK RTCM3.x
- Click OK.
- Click OK.
- Click the X button to close the window.
- Click on Tracking & Positioning.
- Click on the Base tab.
- Click the Antenna Type drop down.
- Select the reciever being used.
- Click the ellipsis button under Antenna Reference Port.
- Click Get from receiver.
- Click Stop.
- Click OK.
- Click OK .
- Click Disconnect.
