HiPer VR: LED display panel

This article will go over the functions and meaning of the LED lights on the HiPer VR’s display.

Log in or sign up for myTopcon to view this page:
Sign In Sign Up

HiPer VR: LED display panel

5 0

Power Button

  • Power on: press and hold for 1 second
  • Power off: press and hold for 3-10 seconds. Release when the STAT LED turns yellow.
  • Start/Stop Data Logging: press 3 times in a row within 2 seconds
  • Toggle between Static and Kinematic post processing: press 2 times in a row within 1 second
  • Factory Reset/Clear NVRAM: 10-15 seconds
  • Emergency Power Off: press and hold for 60 seconds

Status LEDs

Tracking status LED: the number of blinks indicates the number of tracked satellites.

  • Green: GPS
  • Yellow: GLONASS
  • Cyan: Galileo
  • Magenta: BeiDou
  • Blue: QZSS
  • White: Lband Satellite
  • Red:
    • 1 blink per second: no satellites/no solution
    • 2 blinks per second: receiver is in exception mode
  • Alternating Red, green, and yellow: expired OAF

Recording LED

  • Green blink: file logging in progress
  • Red solid: No free memory/hardware problem
  • Off: no data being logged

    When in occupation mode:

  • Green blink: file logging in progress while in Static mode
  • Yellow blink: file logging in progress while in Kinematic mode
  • Red solid: No free memory/hardware problem

Bluetooth LED

  • Blue blink: Bluetooth is on
  • Blue solid: Bluetooth is connected
  • Blue solid + blue blink every 10 seconds: multiple valid Bluetooth connections

Radio LED: for UHF Modem

Rover and Base

  • Alternating Red, Green, no light: Magnet Field or TRU sends commands to configure the modem.

Rover mode

  • Solid green: Modem is not receiving correction data
  • Yellow blink: Modem is receiving corrections from a base

Base mode

  • Solid green: modem is not receiving correction data
  • Red blink: modem is transmitting correction data.

Retranslator mode (Base)

  • Yellow Blink – Red Blink: Modem is receiving and transmitting correction data.

Radio LED: FH915+ Modem

Rover and Base

  • Alternating Red, Green, no light: Magnet Field or TRU sends commands to configure the modem.

Rover mode

  • Green blink: Modem not synchronized with base
  • Green solid: Modem synchronized with base and ready to receive correction data
  • Yellow: Modem receives correction data from base

Base mode

  • Red solid: Modem transmits correction data

Battery

While receiver is on

  • Green solid: Charge above 50%
  • Yellow solid: Charge between 10% and 50%
  • Red solid: Charge less than 10%

Receiver connected to external power

  • Green solid: Fully charged
  • Green blink: Charging battery, battery above 50%
  • Yellow blink: Charging battery, battery above 10%
  • Red blink: Charging battery, battery above 10%