Firmware Update Procedure
- Go to the Setup screen (via the wrench button in lower left corner).
- Select System / GPS / Receiver / Firmware Upgrade and select the Green Check Mark to continue.
- The update procedure will start automatically and will take a few minutes.
- After the update, the receiver will automatically power cycle.
Reset NVRAM
- Go to the Setup screen (via the wrench button in lower left corner).
- Log in as a dealer User / Access Level. Your local dealer will have the password.
- Select System / GPS / Advanced Configuration / Reset NVRAM and select the Yes to continue.
- The NVRAM Reset procedure will start automatically and will take a few minutes.