LN-100 Configuration:
- Open the battery compartment of the LN-100
- Check that the switch is set to Mode A
- In case of a LN-100W make sure the second switch is set to WLAN
- Power on the instrument
FC-5000 Configuration:
- Click the Wi-Fi icon on the far right side of the Windows taskbar
- Click on Network settings
Note:
All instructions can be applied to any device running a Windows 10 OS
-
Scroll down and enable Hotspot 2.0 networks and Paid Wi-Fi services
-
Click on Network and Sharing Center
- Click on Set up a new connection or network
- Click Manually connect to a wireless network
- Click Next
- Input Network name: LN-100_XXXXXX (Serial number of the LN-100)
- Security type: WPA2-Personal
- Encryption type: AES
- Security key: 00_XXXXXX (Serial number of the LN-100)
- Checkmark Connect even if the network is not broadcasting
- Click Next
- Click Close and finish creating profile
- Click the Wi-Fi icon on the far right of the Windows taskbar
-
Select either of the LN-100 connections
-
Click Connect
-
Establishing the connection may take a few seconds
FC-5000 Configuration (Optional):
-
In case FC-5000 won´t connect open the Network settings again
-
Click on Manage known networks
- Select the LN-100 network
- Click on Forget
-
Follow the instructions of the FC-5000 Configuration again
