Water Conservation and Landforming
Conserve Precious Resources and Boost your Bottom Line
Through careful grading or landforming design,
you can increase efficiency and yields while conserving both topsoil and water.
Through careful grading or landforming design, you can increase efficiency and yields while conserving both topsoil and water.
SEE IT IN ACTIONA range of solutions to manage water use
From 2D Landleveling to 3D Landforming, Topcon solutions help you optimize your resources.
LASER-ACCURATE LEVELING
Select single or dual scraper control, and options from basic manual indication to fully automatic machine control. Set very fine increments of either single or dual slopes at the laser transmitter, and the control system has accurate reference anywhere on your field. And if you need to reset your laser, Topcon provides the best repeatability on the market.
RL-200
Single or dual slope laser
USE LESS WATER, GET BETTER RESULTS
A properly leveled (or slightly sloped) field promotes even and efficient irrigation. You use less water, the crop grows better and more evenly, and your soil is retained. The Topcon land leveling solution provides a survey function that measures, then averages elevations so you can more easily achieve proper leveling, or even maintain roads and ditch pads as well.
DURABILITY, VISIBILITY, REPEATABILITY
Topcon laser land leveling solutions have been at work for decades, and that experience results in a rugged dependable solution delivering great accuracy repeatably, year in, year out. Each component of the solution is optimized with the features that matter and are easy to use. All displays, from the transmitter to the receiver to the control box are bright and easily readable in bright sunlight, with indicators that make sense.
GNSS Landforming with Autosteering
The best of both worlds in a single solution. World's best Autosteering. World's best Landleveling.
Use Variable Slope PWCS to Reduce Volumes Moved
AGForm-3D state-of-the-art survey and design software includes the Topcon Variable Slope PWCS field design module which has revolutionized land leveling by significantly reducing the volume of material moved and by keeping design surfaces closer to the original terrain.
You get complete control with the ability to survey, design and create plots and reports in a single program, with no per-acre fees or extra charges.
AUTOSTEERING ADDS EFFICIENCY AND STRESS RELIEF
Operator fatigue can cut short the work day and degrade performance, but autosteering drastically reduces fatigue, extending the work day, and improving results and efficiency. Now, every pass is maximized, fewer passes are necessary, and no multiple passes over the same area are necessary due to gap and overlap. Combined with elevation control of single or dual bucket(s), this is the very best performance available today.
Landleveling contractor in Louisiana uses Topcon AGForm-3D software
David Bader, precision landleveling contractor in Northeast Louisiana, talks about how he uses Topcon's System 210 and AGForm-3D software to improve surface drainage for rice and row crops in the Delta. Topcon's software helps him save customers' money by making his leveling equipment more efficient.
Complete Design and Landformimg Solution
The Topcon GNSS solution allows the operator to survey, create cut/fill maps and start grading without ever leaving the cab. GNSS (GPS + GLONASS) satellite reception standard provides maximum accuracy, with either single or dual scraper control. Grade more than 12,000 acres in a single setup, and work 24/7, even in dusty conditions.
AgForm 3D
3D field design
Use Variable Slopes to Reduce Volumes Moved
AGForm-3D state-of-the-art survey and design software includes the Topcon Variable Slope PWCS field design module that has revolutionized land leveling by significantly reducing the volume of material moved, and by keeping design surfaces closer to the original terrain.
You get complete control with the ability to survey, design and create plots and reports in a single program, with no per-acre fees or extra charges.
Easy to Get Started
Drive the field to create a topo survey
Simply driving the entire field with your equipped vehicle with elevation mapping turned on will generate a map that can be imported into AgForm-3D.
Use AgForm-3D to generate variable slope cut/fill map.
Algorithms in the software generate best-fit cut/fill maps that achieve management goals while moving the minimum amount of soil.
Import Cut/Fill Map to Console and Begin
AGForm-3D offers complete control with the ability to survey, design and create plots and reports in a single program. With no pre-acre fees, it's a one-time investment that generates rewards immediately.
A complete suite of water management products
Topcon is rightly famed for ease of use. We take great pride and care in developing interfaces that provide visibility and feedback, easy to understand design, and finely-calibrated control. Our goal is to support your ability to accomplish your tasks, and our consoles and displays are the foundation.
Topcon offers a range of machine control solutions for application control, variable rate control, auto section control, boom leveling, and more. Any equipment owner can tap into the productivity provided by Topcon technology solutions. We've got you covered.
The best possible water conservation measures are a must for the modern irrigated farm. Topcon offers a range of solutions, from laser accuracy to state of the art multi-slope solutions using GNSS.
Insights & testimonials
Expanding Capabilities in Rice and Sugarcane with Topcon Landforming
Boosting Sugarcane Production with Topcon Landforming
Topcon Landforming - Opening Opportunities in Costa Rica
We've got you covered
Need more info?
We can email you additional product information. Your contact information will never be shared.
See it in action
Your local dealer can't wait to show you what we can do for your business.